---
title: Solvent Recovery Oxygen Analyser | Sarvesh
url: https://www.sarveshanalytics.com/applications/solvent-recovery-and-distillation-columns-under-inert-gas.html
description: Solvent recovery oxygen analyser with ACCURRA-Hz and INFINITY-Tx. Solvent vapour needs an oxygen reading in vent and blanket lines. Made in Pune.
updated: 2026-11-02
source: html
---

Pharma, chemicals and petrochemicals

# Oxygen analysis for solvent recovery and distillation under inert gas

Solvent vapour needs an oxygen reading in vent and blanket lines. Sarvesh supplies ACCURRA-Hz and INFINITY-Tx, built in Pune, with sampling matched to the stream.

- ISO 9001:2015, certified by TÜV
- Designed and built in Pune since 2002
- Supplied to Reliance, Tata Steel, Indian Oil, Linde and ISRO

 Quick answer

Use ACCURRA-Hz, Infinity-Tx. Solvent vapour needs an oxygen reading in vent and blanket lines. Hazardous area; confirm certificate.

Updated 2 November 2026 · Figures from Sarvesh datasheets

## The measurement and why it matters

Solvent vapour needs an oxygen reading in vent and blanket lines. This is a good fit, with one configuration or sample-handling point to confirm before we quote.

Solvent vapour, fine powders and reactive intermediates are handled under inert gas, and the oxygen limit in vent and blanket lines is a safety figure. Hazardous-area units and a loop-powered transmitter cover the classified locations.

ACCURRA-Hz uses an enclosure certified for Gas Group IIC, Zone 1 and 2, T6, and INFINITY-Tx is a loop-powered two-wire transmitter. Confirm the certificate against your zone before ordering; we make no SIL claim.

Typical buyers in India: pharma and fine-chemical plants (several are customers). Where this matches your plant, send us the gas, range, pressure and temperature at the tapping point and we will confirm the analyser and sample path.

## Models and ranges

| Model | Measures | Range | Sensor and notes |
|---|---|---|---|
| ACCURRA-Hz | Oxygen, hazardous area | Percent and trace | Gas Group IIC, Zone 1 and 2, T6 |
| INFINITY-Tx | Oxygen transmitter | Percent O2 | Loop powered two-wire, hazardous areas |

## Process notes

### What the analyser reads here

Gases of interest: O2. Analyser fit: ACCURRA-Hz, Infinity-Tx.

The table above lists each model with its range; where a row says to confirm the range, we check it against the datasheet for your application before quoting.

### What to settle before ordering

Hazardous area; confirm certificate.

We would rather confirm these points at the start than discover them at commissioning, so please include them with your process details.

## Related applications

This page overlaps with:

- [Nitrogen blanketing and inerting](https://www.sarveshanalytics.com/applications/nitrogen-blanketing-and-inerting.html)

## Sampling and installation

- Every ACCURRA-S has an internal fine filter and rotameter. Regulate sample pressure and flow externally; the catalogue recommends about 1 LPM and a sample pressure of 2 to 10 psig.
- Keep sample lines short, clean and dry, and vent the sample somewhere safe.

## Send us your process data

**What the data sheet asks for**

Send what you have and we will ask for the rest.

- The gases to measure, the range, and the accuracy you need
- Background gases and their typical composition
- Sample temperature, pressure and dew point at the tapping point
- Dust level, and whether the gas carries tar, oil or condensable vapour
- Process connection and, for ducts, the duct diameter
- Where the sample vents to, and at what pressure
- Area classification of the tapping point and of the analyser location, and the IP protection needed
- Distance between the tapping point and the analyser
- Outputs you need: 4-20 mA, dual range, relays, Modbus RTU
- Calibration approach, calibration gas available, and whether blowback is required
- Utilities at site: power supply, instrument air, nitrogen, steam and cooling water, and the ambient temperature range
- Gases and ranges: O2
- The point to confirm: Hazardous area; confirm certificate.

## Recommended Sarvesh products

[

### ACCURRA-Hz

Certified enclosure for Gas Group IIC, Zone 1 and 2, T6. View ACCURRA-Hz

](https://www.sarveshanalytics.com/hazardous-gas-analysers.html)[

### INFINITY-Tx

Loop-powered two-wire oxygen transmitter. View INFINITY-Tx

](https://www.sarveshanalytics.com/oxygen-transmitter.html)

## Frequently asked questions

**Which analyser suits solvent-recovery and distillation columns under inert gas?**

ACCURRA-Hz, Infinity-Tx Solvent vapour needs an oxygen reading in vent and blanket lines.

**What should I check before ordering for solvent-recovery and distillation columns under inert gas?**

Hazardous area; confirm certificate.

**Who typically needs this?**

Typical buyers in India: pharma and fine-chemical plants (several are customers).

**Can Sarvesh support a variation of this application?**

Yes. If your process differs from the usual case, send the details. Application engineering is where we start every project, and bespoke applications are welcome.

## More in Pharma, chemicals and petrochemicals

- [Nitrogen blanketing and inerting](https://www.sarveshanalytics.com/applications/nitrogen-blanketing-and-inerting.html)
- [Reactors, hydrogenation and polymerisation](https://www.sarveshanalytics.com/applications/chemical-reactor-hydrogenation-trace-oxygen.html)
- [Closed-loop dryers and spray dryers](https://www.sarveshanalytics.com/applications/closed-loop-and-spray-dryer-oxygen-safety.html)
- [Fermenter and bioreactor off-gas](https://www.sarveshanalytics.com/applications/fermenter-and-bioreactor-off-gas.html)
- [Pyrolysis, gasification and syngas](https://www.sarveshanalytics.com/applications/pyrolysis-gasification-and-syngas.html)
- [Autoclaves](https://www.sarveshanalytics.com/applications/autoclave-oxygen-measurement.html)
- [Flare-gas recovery oxygen ingress](https://www.sarveshanalytics.com/applications/flare-gas-recovery-oxygen-ingress.html)
- [Dust-collector, mill and silo inerting](https://www.sarveshanalytics.com/applications/dust-collector-mill-and-silo-inerting.html)
- [**All pharma, chemicals and petrochemicals applications**](https://www.sarveshanalytics.com/industries/pharmaceutical-chemical-petrochemical-gas-analysers.html)
- [Browse analysers by gas](https://www.sarveshanalytics.com/gas-analyser.html)
