---
title: Service and Support | Commissioning, Repairs, Spares | Sarvesh
url: https://www.sarveshanalytics.com/service.html
description: Commissioning in India and overseas, repairs, spares and calibration support for ACCURRA analysers and i-Cons, from the Pune team that built them.
updated: 2026-11-02
source: html
---

Service and support

# The engineers who built it keep it running.

Commissioning, repairs, spares and calibration support for ACCURRA analysers, i-Cons conditioners and our sample systems, from the same Pune team that designed them.

  What we do

## From the first power-up to the last spare part.

### Commissioning

Our engineers commission analysers and sample systems on site, in India and overseas, and hand over a working measurement to your team.

### Repairs

Analysers and conditioners are repaired by the people who build them, so the fault is found by someone who knows the design.

### Spares and consumables

Gas sensors, filter elements, peristaltic pump tubes, sample pump kits and Headline filter elements, matched to the instrument you run.

### Calibration support

Advice on zero and span gases for each model, calibration intervals, and reading the calibration history your analyser already keeps.

### System Health Management

After handover our focus stays on support and product health, so the measurement keeps doing its job for the life of the plant.

### Application review

Process changed? Send us the new gas, range or sample conditions and we will check that the analyser and sampling still fit.

  Built for service

## The analyser tells you what it needs before it fails.

Maintenance is planned from data the instruments already record, not from guesswork.

- ACCURRA analysers store calibration, alarm and fault records with time stamps, showing calibration drift and residual sensor life
- i-Cons tracks the remaining life of filters, pump tubes and pump kits and prompts for replacement before they fail
- Built-in hardware diagnostics test and simulate the electronics when something goes wrong
- Modbus RTU over RS 485 brings status, health and history to your control system or PC
- On ACCURRA-Hz, the optional ACCURRA-CONNECT software operates the analyser remotely, where movement in the hazardous area is restricted

  Before we arrive

## A ready site makes for a short commissioning visit.

Every product page lists its utilities and calibration gases under "On site". The usual checklist:

- Power at the analyser point, and separate power for any heated hose and probe
- Zero and span gases in 10 litre cylinders with regulators, for each measurement
- Instrument air at the pressure the product page states, with a 1/2 inch connection near the tapping point for probe blowback
- An air-conditioned, dust-free room for analysers and i-Cons conditioners
- The sample point, process connection and cable routes installed and ready

## Need help with an installed analyser?

Give us the model, the serial number if you have it, and what you see. Support: +91 94 2300 4178.

[Request service](https://www.sarveshanalytics.com/contact.html?ref=Service%20and%20support#enquiry)[Call support](tel:+919423004178)