Trace moisture measurement for classified areas is handled on the ACCURRA-Hz platform. Contact Sarvesh for the current configuration and certificate scope. The safe-area M015 reads minus 80 to plus 20 C dew point if you can sample to a safe-area house.
Specifications
| Item | Specification | Notes |
|---|---|---|
| Measurement | Trace moisture, dew point | Ceramic sensor technology as on M015 |
| Enclosure | Gas Group IIC, Zone 1 and 2, T6 | Confirm for the moisture configuration |
| Safe-area reference | M015: -80 to +20 C dew point |
From the current Sarvesh product datasheets and company profile. Specifications may change without notice as products improve. The final responsibility to check that a product meets the process and analyser requirement remains with the customer.
Key features
- Dew point or ppm moisture in classified areas
- Alarm relays and outputs
- Same platform and diagnostics as ACCURRA-Hz
How it works
Moisture in hydrogen, in reactor feed and in solvent systems affects product quality and safety, and the plants that care are classified. Moisture measurement in such areas uses certified equipment, or a sample taken to a safe-area house.
The safe-area moisture analyser M015 reads from minus 80 to plus 20 C dew point with a ceramic sensor. For classified areas, please contact us with the area classification, gas and dew point range so we can confirm the configuration and certification that applies.
Requirements and limits
- Please confirm the hazardous-area moisture configuration and its certificate scope with us before ordering.
- Field calibration is not possible on the safe-area dew point model M015.
Selection guidance
Choose this route for product hydrogen from electrolysers, reactor feed gas and dryers in classified areas. If a safe-area house is available, M015 can also be used.
Applications
Application pages where this is part of the recommended solution:
Compatible products
ACCURRA-Hz
Process gas analyser in an enclosure certified for Gas Group IIC, Zone 1 and 2, T6.
View ACCURRA-Hz
ACCURRA-S
Online analyser for trace, percent and purity O2, CO, CO2, CH4 and dew point; can measure two gases from one sample.
View ACCURRA-SHeadline filters
Particulate, coalescing and PTFE membrane filters from Headline Filters, UK, for analyser protection.
View Headline filtersFrequently asked questions
Is a hazardous-area moisture analyser available?
Please ask us for the current configuration and certificate scope for your classification.
What range?
Safe-area M015 reads minus 80 to plus 20 C dew point.
Can I use a safe-area analyser instead?
Yes, if you can sample to a safe-area house.
Can I calibrate dew point on site?
Not on the safe-area M015, where field calibration is not possible; please ask us.
Related pages
- ACCURRA-S
- ACCURRA-S oxygen analysers
- ACCURRA-S carbon monoxide analysers
- ACCURRA-S carbon dioxide analysers
- ACCURRA-S methane analyser
- ACCURRA-S M015 moisture analyser
- ACCURRA-Hz
- Hazardous-area oxygen analyser
- INFINITY-Tx
- Hazardous-area hydrogen analyser
- ACCURRA-Zr
- ACCURRA model numbers
- Browse all gas analysers